The Impinj RS1000 Development Kit enables quick evaluation and development with Impinj RS1000. It provides an easy way to communicate with the Impinj RS1000 via a USB-UART host, and provides easy access to the inputs and outputs of the device.
To get started using the kit, check out the main support article for the Impinj RS1000 Development Kit.
The following files describe the design and hardware implementation of the kit:
- Schematic (PDF)
- Bill of Materials (PDF)
- Bill of Materials (XLSX)
- Layout (PDF)
- Fabrication files (ZIP)
- Altium EDA Project (ZIP)
Also of interest are the Impinj RS1000 Datasheet and RS1000 Hardware User's Guide.
These files document the production version of the kit PCB, which has a revision number of 2.2 (visible in silkscreen on right hand side of the PCB, next to the Impinj logo).
Note: The Indy R500, R1000, and R2000 Development Kits' downloads are documented here. The Indy RS500 Development Kit's downloads are documented here, and the Indy RS2000 Development Kit's downloads are documented here.
Comments
Article is closed for comments.