Speedway Revolution Embedded Development Tools and Sample Application (ETK)

This page explains how to install the Octane ETK. Please choose the appropriate instructions for the version you're using based on the following table:

Firmware Version 6.4.1 7.6.0
Octane ETK 6.0.0 7.6.0
Octane ETK Checksum 6.0.0 7.6.0
Octane ETK 6.0.0 Octane ETK 7.6.0

The Octane ETK is a bundle of libraries, tools, and examples for creating an embedded application on Impinj Speedway Revolution readers and gateways.  Development is supported with Ubuntu Operating System version 18.04, 19.10, and 20.04.  The documentation we provide explains how to setup this environment, cross compile libraries for the ARM processor **, and use VSCode to perform remote debugging **.

** - Training Videos Only

Documentation:

Released Version: 7.6.0

Recommended Reader / Gateway Firmware Version:

     - Octane FW 7.6.0 or later : Download Here (For Impinj Partners)
Development Environment: Ubuntu 20.04 (64-bit recommended)
Download Files Contain:

     - Cross-compiler Toolchain (ARM and x86)
     - Cap File Generator Tool
     - File System Image from Directory Tool
     - Kernel Headers
     - Cap File for Enabling Ftp and System Shell
     - Tag Reading Example
     - Makefile to Build the Example
Gnu Toolchain: 7
Documentation:
     -Impinj Octane Embedded Toolkit Quick Start Guide
     -Impinj Reader and Gateway Embedded Developers Guide
Octane ETK Training Videos (For Impinj Partners) cover:

     - An overview of Octane ETK Development
     - How to install an Ubuntu 16.04 environment for Octane ETK Development
     - How to install the Octane ETK tools and sample
     - How to run the Octane ETK Sample application on an Impinj reader or gateway
     - How to remotely debug the Octane ETK Sample from the Ubuntu 16.04 host using VSCode.
     - How to cross compile other libraries and applications to use in your application.
Was this article helpful?
10 out of 13 found this helpful

Comments

8 comments
  • Posted latest version of Impinj Embedded Development Tools (5.10.1).

    0
    Comment actions Permalink
  • Posted latest version of Impinj Embedded Development Tools (5.12.0).

    0
    Comment actions Permalink
  • Posted latest version of Impinj Embedded Development Tools (7.0.0). Octane Firmware version 7.0.0 is required.

    0
    Comment actions Permalink
  • Posted latest version of Impinj Embedded Development Tools (7.0.1). Octane Firmware version 7.0.0 is required.

    0
    Comment actions Permalink
  • Posted latest version of Impinj Embedded Development Tools (7.3.0). Octane Firmware version 7.3.0 is required.

    0
    Comment actions Permalink
  • Posted latest version of Impinj Embedded Development Tools (7.5.0). Octane Firmware version 7.5.0 is required.

    0
    Comment actions Permalink
  • Posted latest version of Impinj Embedded Development Tools (7.5.1). Octane Firmware version 7.5.0 is required.

    0
    Comment actions Permalink
  • Posted latest version of Impinj Embedded Development Tools (7.6.0). Octane Firmware version 7.6.0 is required.

    0
    Comment actions Permalink

Article is closed for comments.