Upgrade Firmware on Speedway RAIN RFID Readers and Gateways using the Web Management UI [VIDEO]

Here's a video that shows how to upgrade the firmware for the Speedway RAIN RFID Readers and Gateways.

Here are a few tips before trying this:

  1. Ensure the Speedway Reader or Gateway is powered (via PoE or Impinj Power Supply)
  2. Ensure the Speedway Reader or Gateway is connected to your PC or your local area network
  3. Ensure you can ping the Speedway Reader via the reader's host name or IP address
  4. Download the latest Octane firmware from our Support Portal (Impinj authorized partners only)
Was this article helpful?
0 out of 1 found this helpful

Comments

0 comments

Article is closed for comments.