Upgrade Firmware on the Speedway Revolution using the Web Management UI [VIDEO]

Here's a video that shows how to upgrade the firmware for the Speedway Revolution and Speedway xPortal readers.

Here are a few tips before trying this:

  1. Ensure the reader is powered (via PoE or Impinj Power Supply)
  2. Ensure the reader is connected to your PC or your local area network
  3. Ensure you can ping the reader via the reader's host name or IP address
  4. Download the latest firmware from our Support Portal (Impinj authorized partners only)
Was this article helpful?
0 out of 0 found this helpful

Comments

0 comments

Article is closed for comments.