ItemTest is a simple, easy-to-use, Windows-compatible application for evaluating the functionality and performance of one or more Impinj readers and gateways. ItemTest supports Inventory, Location, and Direction mode use cases. Additionally, it can perform rudimentary tag memory access operations.
|Latest Released Versions: 2.8.0|
|Recommended Reader / Gateway Firmware Version:
- Octane FW 6.4.1 or later : Download Here (For Impinj Partners)
- Older versions may not support certain features
(If you get "To run this application, you must install .NET" error, please try the link above)
Accessible from the Help Menu within ItemTest. It describes how to install, configure, and perform basic testing on an Impinj reader and gateway. It includes detailed procedures that explain each feature and how it should be used to help you test and verify an Impinj reader and/or gateway.
|Customers switching from MultiReader to using ItemTest should read this guide.|
|Training Videos (For Impinj Partners):
Many capabilities are explained by the training videos we provide.
| Related Material:
Understanding EPC Gen2 Search Modes and Sessions
Reader Modes Made Easy
How to disable and Re-enable AutoTune for Monza 6
Use Monza X to Trigger an Interrupt or Blink an LED
Capturing Debug Data (aka RDD)
|Download Older Versions|
Posted new ItemTest software version 1.6.1.
Posted new ItemTest software version 1.8.0.
Posted new ItemTest software version 1.10.0.
Posted new ItemTest software version 1.12.0.
Posted new ItemTest software version 1.12.1.
ItemTest software version 1.12.1 has been removed due to an issue. Please use version 1.10.0 until the next release is available.
Posted new ItemTest software version 1.12.2. If you were using version 1.12.1, please update to this latest release.
Posted new ItemTest software version 1.12.3.
Posted new ItemTest software version 1.14.0.
Posted new ItemTest software version 2.3.0.
Posted new ItemTest software version 2.6.0.
Article is closed for comments.