1. Impinj Support Portal
  2. Readers
  3. Speedway Readers

Impinj ItemTest Software

Avatar
Mike Lenehan
Follow

ItemTest is a simple, easy-to-use, Windows-compatible application for evaluating the functionality and performance of one or more Impinj readers and gateways. ItemTest supports Inventory, Location, and Direction mode use cases. Additionally, it can perform rudimentary tag memory access operations.

Download Impinj ItemTest Software

Documentation:

Latest Released Versions: 2.10.0

Supported Hardware:
          Impinj R700,
          Speedway Revolution readers (R120, R220 and R420), and
          Gateways (xPortal R640, xSpan R660, and xArray R680)
          Hardware PCBA Rev 4 and above.
Recommended Reader / Gateway Firmware Version:
     - Octane FW 6.4.1 or later : Download Here (For Impinj Partners)
     - Older versions may not support certain features
Required OS:
     Windows 10

Required .NET:
.NET 6.0 SDK
(If you get "To run this application, you must install .NET" error, please try the link above)
User Guide:
          Accessible from the Help Menu within ItemTest.  It describes how to install, configure, and perform basic testing on an Impinj reader and gateway. It includes detailed procedures that explain each feature and how it should be used to help you test and verify an Impinj reader and/or gateway.
Customers switching from MultiReader to using ItemTest should read this guide.
Training Videos (For Impinj Partners):
     Many capabilities are explained by the training videos we provide.
 
 Related Material:
  Understanding EPC Gen2 Search Modes and Sessions
  Reader Modes Made Easy 
  How to disable and Re-enable AutoTune for Monza 6 
  Use Monza X to Trigger an Interrupt or Blink an LED 
  Capturing Debug Data (aka RDD)
 
Download Older Versions

 

Was this article helpful?
7 out of 11 found this helpful

Comments

15 comments
Sort by Date Votes
  • Avatar
    Mike Lenehan

    Posted new ItemTest software version 1.6.1.

    0
    Comment actions Permalink
  • Avatar
    Mike Lenehan

    Posted new ItemTest software version 1.8.0.

    0
    Comment actions Permalink
  • Avatar
    Mike Lenehan

    Posted new ItemTest software version 1.10.0.

    0
    Comment actions Permalink
  • Avatar
    Mike Lenehan

    Posted new ItemTest software version 1.12.0.

    0
    Comment actions Permalink
  • Avatar
    Mike Lenehan

    Posted new ItemTest software version 1.12.1.

    0
    Comment actions Permalink
  • Avatar
    Mike Lenehan

    ItemTest software version 1.12.1 has been removed due to an issue. Please use version 1.10.0 until the next release is available.

    0
    Comment actions Permalink
  • Avatar
    Mike Lenehan

    Posted new ItemTest software version 1.12.2. If you were using version 1.12.1, please update to this latest release.

    0
    Comment actions Permalink
  • Avatar
    Mike Lenehan

    Posted new ItemTest software version 1.12.3.

    0
    Comment actions Permalink
  • Avatar
    Mike Lenehan

    Posted new ItemTest software version 1.14.0.

    0
    Comment actions Permalink
  • Avatar
    Mike Lenehan

    Posted new ItemTest software version 2.3.0.

    0
    Comment actions Permalink
  • Avatar
    Mike Lenehan

    Posted new ItemTest software version 2.4.0.

    0
    Comment actions Permalink
  • Avatar
    Mike Lenehan

    Posted new ItemTest software version 2.5.1.

    0
    Comment actions Permalink
  • Avatar
    Mike Lenehan

    Posted new ItemTest software version 2.6.0.

    0
    Comment actions Permalink
  • Avatar
    Mike Lenehan

    ItemTest software version 2.7.0 has been posted.

    0
    Comment actions Permalink
  • Avatar
    Mike Lenehan

    ItemTest software version 2.8.0 has been posted.

    0
    Comment actions Permalink

Article is closed for comments.

Articles in this section

See more