The following table outlines the different regions and geographies where each Impinj gateway is certified.*
|Approved Gateway Part Numbers|
|Region||R640 (xPortal)||R660 (xSpan)||R680 (xArray)|
*Subject to change. Certification means having a LLRP region identification number and a regulatory certificate where required. Regulatory certification is voluntary in some countries. N/A indicates there is no certification for that device and therefore this product cannot be used in that region.
** Must be purchased from authorized India distributor.
*** Users in Singapore are required to obtain a license for each use case where the radiated power during operation is between 500mW and 2000mW. Contact the local regulatory authority (IDMA or ARFM respectively) to obtain a license.
To ensure regulatory compliance, professional installers / integrators must follow the transmit power setting instructions provided in the Installation and Operations Guide. Impinj recommends readers should be used with the antennas listed in Appendix A of the Installation and Operations Guide or with antenna(s) of the same type with equal or less gain. RFID Integrators should contact the regulatory agency in the country where equipment is to be used to determine if their RFID system requires any additional testing/certification.