Impinj Speedway Series Reader Documents & Downloads

The following table contains the production releases for the Impinj Speedway readers and gateways. Please select the appropriate tab for the required documentation.

To determine which PCBA version hardware you have, please refer to this guide.

R220/R420 (Rev 5+) R220/R420 (Rev 4) R660 (xSpan) R680 (xArray)

Impinj Speedway documentation (Rev 5+)

Content Download
Firmware  Current Firmware
 Current Firmware Release Notes
 Previous releases
Note: The above links are restricted to Impinj-authorized partners.
Product Documentation - Impinj Speedway Datasheet
- Impinj Speedway Product Brief
- Impinj Speedway Drawing & CAD Files
- Impinj Speedway FAQ
Operational Documentation - Quick Start Guide
- Installation and Operations Guide
- Octane Firmware Upgrade Reference Manual

Regulatory Documentation

- Certified Regions and Geographies
- Impinj Speedway Regulatory Information
- EU Declaration of Conformity
- UK Declaration of Conformity
- RoHS Compliance
Impinj ItemTest -  Impinj ItemTest Software v2.10.0  [User Guide]  [Previous Releases]
- Required .NET: .NET 6.0 SDK
(If you get "To run this application, you must install .NET" error, please try the link above)
Development Library Documentation - Impinj Octane LLRP Guide
- Impinj LTK Programmers Guide
- Impinj Octane SNMP Guide & MIBs
- Impinj Octane Embedded Toolkit Quick Start Guide
- Impinj Reader and Gateway Embedded Developers Guide
- Speedway ETK Sample Application
Development Libraries Host Libraries
- SDK .NET
- SDK Java
- LTK .NET
- LTK Java
- LTK C++ Linux
- LTK C
- LTK Impinj Definition Files

Embedded/On-Reader Development
- Embedded Development Tools
Accessories - Speedway Antenna Hub
- Speedway Antenna Hub Quick Start Guide
- Speedway GPIO Box Datasheet
Reference - EU Upper Band Country List
- Round Rock License & FAQ
- Speedway Plenum Applications
- Product Warranty Options
Learning Center - Learning Center Documentation
Was this article helpful?
1 out of 1 found this helpful

Comments

0 comments

Article is closed for comments.