Notice
Select Impinj Accessories are entering the end-of-life process as of Aug 2023. Please see the Impinj EOL Product Notice page for additional details.
Here is the antenna datasheet for the following antennas sold by Impinj:
- IPJ-A1100-USA Slim Outdoor Antenna (FCC) (25 x 25 x 1.4 cm)
- IPJ-A1100-EU1 Slim Outdoor Antenna (ETSI) (25 x 25 x 1.4 cm)
The Slim Outdoor antenna by Times-7 is a thin, powerful, long-read range RAIN RFID antenna rated for permanent outdoor and industrial use.
Connector type: SMA female side connector
Mounting options:
- Flush mounting by attaching screws or bolts through the corner holes in the housing
- The screw used to fit these holes is Screw #8x1" s/s Phillips white Pan head.
- Use of double-sided industrial tape
- NOTE: this model does not support VESA mounting option
Requires one of the following accessory cables to connect directly to reader:
| Part Number | Description |
| IPJ-A3002-000 | SMA (male) to RP-TNC (male) 6.5 ft (2m) |
| IPJ-A3004-000 | SMA (male) to RP-TNC (male) 13 ft (4m) |
| IPJ-A3008-000 | SMA (male) to RP-TNC (male) 26 ft (8m) |
| IPJ-A3112-000 | SMA (male) to RP-TNC (male) LL400 Flex 7 ft (2.14m) |
| IPJ-A3114-000 | SMA (male) to RP-TNC (male) LL400 Flex 15 ft (4.57m) |
If connecting to the Impinj Antenna Hub, use one of the following accessory cables:
| Part Number | Description |
| IPJ-A3122-000 | SMA (male) to SMA (male) LL400 Flex 7 ft (2.14m) |
| IPJ-A3124-000 | SMA (male) to SMA (male) LL400 Flex 15 ft (4.57m) |
Comments
Article is closed for comments.