As part of ongoing quality improvement initiatives, Impinj is now shipping 200mm RAIN RFID tag chip wafer boats and clam packs in resealable moisture barrier bags (MBB). MBBs are vacuum-sealed in our factory to protect against moisture while wafers are in transit.
MBBs also allow customers to reduce the potential for moisture buildup while storing wafers in their facilities, preserving quality and maximizing shelf life.
Affected Products:
| Product Name | Ordering Part Numbers |
|---|---|
| Impinj Monza 4D tag chips | IPJ-W1513-E00, IPJ-W1513-F00 |
| Impinj Monza 4E tag chips | IPJ-W1510-E00, IPJ-W1510-F00 |
| Impinj Monza 4QT tag chips | IPJ-W1512-E00, IPJ-W1512-F00 |
| Impinj Monza R6 tag chips | IPJ-W1700-K00 |
| Impinj Monza R6-P tag chips | IPJ-W1710-B00, IPJ-W1710-K00 |
Resealable Moisture Barrier Bag (MBB) instructions
- To open a vacuum-sealed MBB, cut between the permanently sealed top of the bag and the zipper lock, as shown below.
- To reseal the MBB, press the zip strip together from end to end until it clicks and completely closes the bag.
For additional information about handling and storing Impinj tag chip wafers, please refer to our Wafer Handling Specification and Storage guidance or contact Impinj customer support at support@impinj.com.
Comments
Article is closed for comments.